Hammers

DTH Hammers 3" to 12"

Featured application

DTH Hammers 3" to 12"

High-efficiency DTH drilling equipment designed to operate at working pressures between 0.5 and 2.5 MPa. Available in a wide variety of models and shank configurations, adapting to multiple operating requirements in the field. Key applications: Mining, water wells, anchoring and micropiles.

Models
9
Applications
4
Línea
Hammers

Comparison table

DTH Hammers 3" to 12"

MODEL	SM35 - HD	SM40 - HD	SM50 - HD	SM60 - HD/XL	SM60 - QL	SM80 - HD	SM80 - QL	SM60-HDW QL
TOP THREAD	2 3/8" REG	2 3/8" REG	3 1/2" REG	3 1/2" REG	3 1/2" REG	4 1/2" REG	4 1/2" REG	BECO 3
TUNGSTEN CARBIDE INSERT	NO	YES	YES	YES	YES	YES	YES	YES
OUTSIDE DIAMETER	81 mm	99 mm	125 mm	142 mm	146 mm	180 mm	184 mm	150 mm
LENGTH W/O BIT	930 mm	1030 mm	1170 mm	1248 / 1308 mm (XL)	1057 mm	1487 mm	1434 mm	1212 mm
TOTAL WEIGHT	24,5 kg	39,2 kg	71,5 kg	98 / 102 kg (XL)	95 kg	188 kg	182 kg	95 kg (sin bit)
PISTON WEIGHT	5,4 kg	8,8 kg	17,5 kg	23,6 kg	20,44 kg	41,80 kg	39,80 kg	23,6 kg
SHANK	DHD 3.5	DHD 340	DHD 350	DHD360 / SM60XL	QL60	DHD 380	QL80	QL60
AIR CONSUMPTION 10 BAR	4,8 m³/min	6 m³/min	8,7 m³/min	10,5 m³/min	10,3 m³/min	11,4 m³/min	11,2 m³/min	10,5 m³/min
AIR CONSUMPTION 18 BAR	9,6 m³/min	10,8 m³/min	16,8 m³/min	20,4 m³/min	19,9 m³/min	22,2 m³/min	21,8 m³/min	20,4 m³/min
AIR CONSUMPTION 24 BAR	12,6 m³/min	15 m³/min	23,4 m³/min	28,5 m³/min	27,3 m³/min	29,7 m³/min	29,4 m³/min	28,5 m³/min

MODEL	SM35 - HD	SM40 - HD	SM50 - HD	SM60 - HD/XL	SM60 - QL	SM80 - HD	SM80 - QL	SM60-HDW QL
TOP THREAD	2 3/8" REG	2 3/8" REG	3 1/2" REG	3 1/2" REG	3 1/2" REG	4 1/2" REG	4 1/2" REG	BECO 3
TUNGSTEN CARBIDE INSERT	NO	YES	YES	YES	YES	YES	YES	YES
OUTSIDE DIAMETER	81 mm	99 mm	125 mm	142 mm	146 mm	180 mm	184 mm	150 mm
LENGTH W/O BIT	930 mm	1030 mm	1170 mm	1248 / 1308 mm (XL)	1057 mm	1487 mm	1434 mm	1212 mm
TOTAL WEIGHT	24,5 kg	39,2 kg	71,5 kg	98 / 102 kg (XL)	95 kg	188 kg	182 kg	95 kg (sin bit)
PISTON WEIGHT	5,4 kg	8,8 kg	17,5 kg	23,6 kg	20,44 kg	41,80 kg	39,80 kg	23,6 kg
SHANK	DHD 3.5	DHD 340	DHD 350	DHD360 / SM60XL	QL60	DHD 380	QL80	QL60
AIR CONSUMPTION 10 BAR	4,8 m³/min	6 m³/min	8,7 m³/min	10,5 m³/min	10,3 m³/min	11,4 m³/min	11,2 m³/min	10,5 m³/min
AIR CONSUMPTION 18 BAR	9,6 m³/min	10,8 m³/min	16,8 m³/min	20,4 m³/min	19,9 m³/min	22,2 m³/min	21,8 m³/min	20,4 m³/min
AIR CONSUMPTION 24 BAR	12,6 m³/min	15 m³/min	23,4 m³/min	28,5 m³/min	27,3 m³/min	29,7 m³/min	29,4 m³/min	28,5 m³/min
WORKING PRESSURE	0.5 - 2.5 MPa	0.5 - 2.5 MPa	0.5 - 2.5 MPa	0.5 - 2.5 MPa	0.5 - 2.5 MPa	0.5 - 2.5 MPa	0.5 - 2.5 MPa	0,5 - 2,5 MPa
IMPACT FREQ. 17 BAR	28 Hz	27 Hz	25 Hz	23 Hz	25 Hz	20 Hz	21 Hz	23 Hz

Models

Menu

Mining

Water Wells

Anchoring and Micropiles

Tunnel Support

Large-Diameter Piles

DTH Hammers 3" to 12"

DTH Hammers 3" to 12"

DTH Hammers 3" to 12"

Productos de DTH Hammers 3" to 12"