South Mining Supply — soluciones en perforación
DTH

SM60 - QL (QL60)

SM60-QL (QL60) hammer for the QL standard.

SM60 - QL (QL60)

SM60-QL DTH hammer compatible with QL60 bits and accessories. Designed for high air pressure operation in consolidated ground.

Features

The current model's column is highlighted. Hover over another column to compare or click any cell to go to that product.

DTH Hammers 3" to 12"

MODELSM35 - HDSM40 - HDSM50 - HDSM60 - HD/XLSM60 - QLSM80 - HDSM80 - QLSM60-HDW QL
TOP THREAD2 3/8" REG2 3/8" REG3 1/2" REG3 1/2" REG3 1/2" REG4 1/2" REG4 1/2" REGBECO 3
TUNGSTEN CARBIDE INSERTNOYESYESYESYESYESYESYES
OUTSIDE DIAMETER81 mm99 mm125 mm142 mm146 mm180 mm184 mm150 mm
LENGTH W/O BIT930 mm1030 mm1170 mm1248 / 1308 mm (XL)1057 mm1487 mm1434 mm1212 mm
TOTAL WEIGHT24,5 kg39,2 kg71,5 kg98 / 102 kg (XL)95 kg188 kg182 kg95 kg (sin bit)
PISTON WEIGHT5,4 kg8,8 kg17,5 kg23,6 kg20,44 kg41,80 kg39,80 kg23,6 kg
SHANKDHD 3.5DHD 340DHD 350DHD360 / SM60XLQL60DHD 380QL80QL60
AIR CONSUMPTION 10 BAR4,8 m³/min6 m³/min8,7 m³/min10,5 m³/min10,3 m³/min11,4 m³/min11,2 m³/min10,5 m³/min
AIR CONSUMPTION 18 BAR9,6 m³/min10,8 m³/min16,8 m³/min20,4 m³/min19,9 m³/min22,2 m³/min21,8 m³/min20,4 m³/min
AIR CONSUMPTION 24 BAR12,6 m³/min15 m³/min23,4 m³/min28,5 m³/min27,3 m³/min29,7 m³/min29,4 m³/min28,5 m³/min

DTH Hammers 3" to 12"

12 filas · scroll para ver el resto

MODELSM35 - HDSM40 - HDSM50 - HDSM60 - HD/XLSM60 - QLSM80 - HDSM80 - QLSM60-HDW QL
TOP THREAD2 3/8" REG2 3/8" REG3 1/2" REG3 1/2" REG3 1/2" REG4 1/2" REG4 1/2" REGBECO 3
TUNGSTEN CARBIDE INSERTNOYESYESYESYESYESYESYES
OUTSIDE DIAMETER81 mm99 mm125 mm142 mm146 mm180 mm184 mm150 mm
LENGTH W/O BIT930 mm1030 mm1170 mm1248 / 1308 mm (XL)1057 mm1487 mm1434 mm1212 mm
TOTAL WEIGHT24,5 kg39,2 kg71,5 kg98 / 102 kg (XL)95 kg188 kg182 kg95 kg (sin bit)
PISTON WEIGHT5,4 kg8,8 kg17,5 kg23,6 kg20,44 kg41,80 kg39,80 kg23,6 kg
SHANKDHD 3.5DHD 340DHD 350DHD360 / SM60XLQL60DHD 380QL80QL60
AIR CONSUMPTION 10 BAR4,8 m³/min6 m³/min8,7 m³/min10,5 m³/min10,3 m³/min11,4 m³/min11,2 m³/min10,5 m³/min
AIR CONSUMPTION 18 BAR9,6 m³/min10,8 m³/min16,8 m³/min20,4 m³/min19,9 m³/min22,2 m³/min21,8 m³/min20,4 m³/min
AIR CONSUMPTION 24 BAR12,6 m³/min15 m³/min23,4 m³/min28,5 m³/min27,3 m³/min29,7 m³/min29,4 m³/min28,5 m³/min
WORKING PRESSURE0.5 - 2.5 MPa0.5 - 2.5 MPa0.5 - 2.5 MPa0.5 - 2.5 MPa0.5 - 2.5 MPa0.5 - 2.5 MPa0.5 - 2.5 MPa0,5 - 2,5 MPa
IMPACT FREQ. 17 BAR28 Hz27 Hz25 Hz23 Hz25 Hz20 Hz21 Hz23 Hz

Applications

  • Mining
  • Water wells
  • Anchoring
  • Micropiles

Compatible DTH bits

Brocas recomendadas para SM60 - QL (QL60)

Relación catálogo 2026: shank QL60 (specific model). Diámetros tolerados por este martillo.

  • 165 mm
  • 178 mm
  • 185 mm
  • 190 mm
Ver familia dhd 360 ql60View small-diameter bits

Highlights

  • High impact frequency and good performance at standard working pressures.
  • Compatible with industry DHD and QL standards.
  • South Mining Supply spare parts and technical support.

High-performance percussive drilling equipment, including down-the-hole (DTH) and reverse circulation (RC) systems, designed to maximize energy transfer to the bit. They operate efficiently across a range of pressures and are available in multiple configurations covering drilling diameters from 3" to 38".